Features for the TPS62085 DCS-Control™ topology Up to 95% efficiency Hiccup short-circuit protection Power save mode for light load efficiency 100% duty cycle for lowest dropout 2.5-V to 6.0-V input voltage range 17-µA operating quiescent current 0.8-V to VIN adjustable output voltage 1.8-V and 3.3-V fixed output voltage Output discharge Power good output Thermal shutdown protection Available in 2-mm × 2-mm VSON package Create a custom design using the: TPS62085 WEBENCH Power Designer TPS62086 WEBENCH Power Designer TPS62087 WEBENCH Power Designer Description for the TPS62085 The TPS62085, TPS62086, and TPS62087 devices are high-frequency synchronous step-down converters optimized for small solution size and high efficiency. With an input voltage range of 2.5 V to 6.0 V, common battery technologies are supported. The devices focus on high-efficiency step-down conversion over a wide output current range. At medium to heavy loads, the converter operates in PWM mode and automatically enters Power Save Mode operation at light load to maintain high efficiency over the entire load current range. To address the requirements of system power rails, the internal compensation circuit allows a large selection of external output capacitor values ranging from 10 µF to 150 µF. Together with its DCS-Control architecture, excellent load transient performance and output voltage regulation accuracy are achieved. The devices are available in a 2-mm × 2-mm VSON package.